3” Copper Transitional Pad
Jewinner copper transitional is specially designed to remove rough scratches left by metal on the floor. Its thickness is 8 mm and there are 7 segments. These transitions are designed for wet running. It adopts a unique formula design and can carry out powerful cutting. It has a very high diamond content and is mixed with a suitable copper resin. The tool can be opened immediately on the equipment to start cutting. Its edge design is very suitable for riding on the lips and joints, this type of tooling is very suitable for heavier machines.
These transitional tooling can be used for polishing concrete, TRU coating and terrazzo. They are generally used for medium-hard concrete with an average service life of 30,000 square feet. Its models are 30, 50, 100, 200, 400, and 800. Please note that he maximum rpm is 300-450 during wet operation, and the speed is slower during dry operation.
- 8mm thick with spiral design
- 7 Segments
- Unique formulation for powerful cutting
- High diamond content mixed with a copper resin
- Radial edge allows for riding over lippage and joints
- Suitable for heavy machine
- Pre-opened to start cutting right away
Weight: 1 lbs/450g
Dimensions: 3 × 3 × 1 in
Grit: 30 grit, 50 grit, 100 grit, 200 grit, 400 grit, 800 grit,1500grit