If your auger teeth are wearing out faster than expected, you can perform a comprehensive inspection by following these steps: Check the installation: Ensure the teeth are compatible with the holders. Verify that they [...]
The primary difference between the two types of teeth lies in their cutting method, which is determined by their distinct tip structures and the way they engage with the ground. Auger bullet teeth feature [...]
You do not necessarily need to replace all the auger teeth at once. You can first inspect the wear on each tooth. If wear is uneven, you can reposition the teeth, moving those with [...]
First, inspect the carbide tip for wear, checking whether the cutting point has become dull and examining the tooth body for cracks or deformation. Next, verify that the holder and tooth are securely installed. [...]
We manufacture matching holders and bullet teeth that are generally compatible with your existing holders. If you are unsure, you can send us the worn teeth or provide some photos, and we will assess [...]
A: We offer concrete pump reducer with various flange connection types, including SK, HD, ZX, and FM flanges.
A: Yes, we can provide samples for quality confirmation before the bulk order.
A: Yes, our engineers can verify the specifications based on your old samples. Having drawings or photos would be even better.
A: Our concrete pump reducers are suitable for various concrete strength grades, including C30, C40, and higher. For C30 concrete, standard reducers generally meet routine pumping requirements. However, for high-strength concrete (C50 and above), [...]
A:Most of our hose fittings undergo heat treatment and can be customized to your specifications, non-heat-treated fittings are available at a lower price.